#------------------------------------------------------------- -*- makefile -*- # # Microsoft Visual C++ makefile for building Tcl with nmake # # See the file "license.terms" for information on usage and redistribution # of this file, and for a DISCLAIMER OF ALL WARRANTIES. # # Copyright (c) 1995-1996 Sun Microsystems, Inc. # Copyright (c) 1998-2000 Ajuba Solutions. # Copyright (c) 2001-2005 ActiveState Corporation. # Copyright (c) 2001-2004 David Gravereaux. # Copyright (c) 2003-2008 Pat Thoyts. # Copyright (c) 2017 Ashok P. Nadkarni #------------------------------------------------------------------------------ # General usage: # nmake [-nologo] -f makefile.vc [TARGET|MACRODEF [TARGET|MACRODEF] [...]] # # For MACRODEF, see TIP 477 (https://core.tcl-lang.org/tips/doc/main/tip/477.md) # or examine Sections 7-9 in rules.vc. # # Possible values for TARGET are: # release -- Builds everything that ships with a release. (default) # core -- Builds the core [tclXX.(dll|lib)] # shell -- Builds tclsh and the core. # dlls -- Just builds the windows extensions. # all -- Builds everything. # test -- Builds and runs the test suite. # tcltest -- Just builds the test shell. # install -- Installs the built binaries and libraries to $(INSTALLDIR) # as the root of the install tree. # tidy/clean/hose -- varying levels of cleaning. # genstubs -- Rebuilds the Stubs table and support files (dev only). # depend -- Generates an accurate set of source dependancies for this # makefile. Helpful to avoid problems when the sources are # refreshed and you rebuild, but can "overbuild" when common # headers like tclInt.h just get small changes. # htmlhelp -- Builds a Windows .chm help file for Tcl and Tk from the # troff manual pages found in $(ROOT)\doc. You need to # have installed the HTML Help Compiler package from Microsoft # to produce the .chm file. # # The steps to setup a Visual C++ environment depend on which # version of Visual Studio and/or the Windows SDK you are building # against and are not described here. The simplest method is generally # to start a command shell using one of the short cuts installed by # Visual Studio/Windows SDK for the appropriate target architecture. # # NOTE: For older (Visual C++ 6 or the 2003 SDK), to use the Platform # SDK (not expressly needed), run setenv.bat after vcvars32.bat # according to the instructions for it. This can also turn on the # 64-bit compiler, if your SDK has it. # # Basic macros and options usable on the commandline (see rules.vc for more info): # OPTS=msvcrt,nothreads,pdbs,profile,static,staticpkg,symbols,thrdalloc,time64bit,unchecked,none # Sets special options for the core. The default is for none. # Any combination of the above may be used (comma separated). # 'none' will over-ride everything to nothing. # # msvcrt = Affects the static option only to switch it from # using libcmt(d) as the C runtime [by default] to # msvcrt(d). This is useful for static embedding # support. # none = Overrides all other options to nothing. # nothreads = Turns off full multithreading support (default on). # pdbs = Produce separate debug symbol files. # profile = Adds profiling hooks. Map file is assumed. # static = Builds a static library of the core instead of a # dll. The shell will be static (and large), as well. # staticpkg = Affects the static option only to switch # tclshXX.exe to have the dde and reg extension linked # inside it. # symbols = Adds symbols for step debugging. # thrdalloc = Use the thread allocator (shared global free pool). # time64bit = Forces a build using 64-bit time_t for 32-bit build # (CRT library should support this). # unchecked = Allows a symbols build to not use the debug # enabled runtime (msvcrt.dll not msvcrtd.dll # or libcmt.lib not libcmtd.lib). # # STATS=compdbg,memdbg,none # Sets optional memory and bytecode compiler debugging code added # to the core. The default is for none. Any combination of the # above may be used (comma separated). 'none' will over-ride # everything to nothing. # # compdbg = Enables byte compilation logging. # memdbg = Enables the debugging memory allocator. # # CHECKS=64bit,fullwarn,nodep,none # Sets special macros for checking compatibility. # # 64bit = Enable 64bit portability warnings (if available) # fullwarn = Builds with full compiler and link warnings enabled. # Very verbose. # nodep = Turns off compatibility macros to ensure the core # isn't being built with deprecated functions. # # MACHINE=(ALPHA|AMD64|ARM64|IA64|IX86) # Set the machine type used for the compiler, linker, and # resource compiler. This hook is needed to tell the tools # when alternate platforms are requested. IX86 is the default # when not specified. If the CPU environment variable has been # set (ie: recent Platform SDK) then MACHINE is set from CPU. # # TMP_DIR= # OUT_DIR= # Hooks to allow the intermediate and output directories to be # changed. $(OUT_DIR) is assumed to be # $(BINROOT)\(Release|Debug) based on if symbols are requested. # $(TMP_DIR) will be $(OUT_DIR)\ by default. # # TESTPAT= # Reads the tests requested to be run from this file. # # Examples: # c:\tcl_src\win\>nmake -f makefile.vc release # c:\tcl_src\win\>nmake -f makefile.vc test # c:\tcl_src\win\>nmake -f makefile.vc install INSTALLDIR=c:\progra~1\tcl # c:\tcl_src\win\>nmake -f makefile.vc release OPTS=pdbs # c:\tcl_src\win\>nmake -f makefile.vc release OPTS=symbols # # NOTE: # Before modifying this file, check whether the modification is applicable # to building extensions as well and if so, modify rules.vc instead. # The PROJECT macro is used by rules.vc for generating appropriate # macros and rules. PROJECT = tcl # Default target to build if no target is specified. If unspecified, the # rules.vc file will set up "all" as the target. DEFAULT_BUILD_TARGET = release # We have a custom resource file RCFILE = tcl.rc # The rules.vc file does much of the hard work in terms of defining # the build configuration, macros, output directories etc. !include "rules.vc" # Tcl version info based on macros set up by rules.vc DOTVERSION = $(TCL_MAJOR_VERSION).$(TCL_MINOR_VERSION) VERSION = $(TCL_MAJOR_VERSION)$(TCL_MINOR_VERSION) # We need versions of various core packages to generate appropriate # file names during installation. !if [echo REM = This file is generated from makefile.vc > versions.vc] !endif !if [echo PKG_HTTP_VER = \>> versions.vc] \ && [nmakehlp -V ..\library\http\pkgIndex.tcl http >> versions.vc] !endif !if [echo PKG_OPT_VER = \>> versions.vc] \ && [nmakehlp -V ..\library\opt\pkgIndex.tcl opt >> versions.vc] !endif !if [echo PKG_TCLTEST_VER = \>> versions.vc] \ && [nmakehlp -V ..\library\tcltest\pkgIndex.tcl tcltest >> versions.vc] !endif !if [echo PKG_MSGCAT_VER = \>> versions.vc] \ && [nmakehlp -V ..\library\msgcat\pkgIndex.tcl msgcat >> versions.vc] !endif !if [echo PKG_PLATFORM_VER = \>> versions.vc] \ && [nmakehlp -V ..\library\platform\pkgIndex.tcl "platform " >> versions.vc] !endif !if [echo PKG_SHELL_VER = \>> versions.vc] \ && [nmakehlp -V ..\library\platform\pkgIndex.tcl "platform::shell" >> versions.vc] !endif !if [echo PKG_DDE_VER = \>> versions.vc] \ && [nmakehlp -V ..\library\dde\pkgIndex.tcl "dde " >> versions.vc] !endif !if [echo PKG_REG_VER =\>> versions.vc] \ && [nmakehlp -V ..\library\reg\pkgIndex.tcl "registry " >> versions.vc] !endif !include versions.vc DDEDOTVERSION = 1.4 DDEVERSION = $(DDEDOTVERSION:.=) REGDOTVERSION = 1.3 REGVERSION = $(REGDOTVERSION:.=) TCLREGLIBNAME = $(PROJECT)reg$(REGVERSION)$(SUFX:t=).$(EXT) TCLREGLIB = $(OUT_DIR)\$(TCLREGLIBNAME) TCLDDELIBNAME = $(PROJECT)dde$(DDEVERSION)$(SUFX:t=).$(EXT) TCLDDELIB = $(OUT_DIR)\$(TCLDDELIBNAME) TCLTEST = $(OUT_DIR)\$(PROJECT)test$(VERSION)$(SUFX:t=).exe CAT32 = $(OUT_DIR)\cat32.exe TCLSHOBJS = \ $(TMP_DIR)\tclAppInit.obj \ !if !$(STATIC_BUILD) !if $(TCL_USE_STATIC_PACKAGES) $(TMP_DIR)\tclWinReg.obj \ $(TMP_DIR)\tclWinDde.obj \ !endif !endif $(TMP_DIR)\tclsh.res TCLTESTOBJS = \ $(TMP_DIR)\tclTest.obj \ $(TMP_DIR)\tclTestObj.obj \ $(TMP_DIR)\tclTestProcBodyObj.obj \ $(TMP_DIR)\tclThreadTest.obj \ $(TMP_DIR)\tclWinTest.obj \ !if !$(STATIC_BUILD) !if $(TCL_USE_STATIC_PACKAGES) $(TMP_DIR)\tclWinReg.obj \ $(TMP_DIR)\tclWinDde.obj \ !endif !endif $(TMP_DIR)\testMain.obj \ $(TMP_DIR)\tcltest.res COREOBJS = \ $(TMP_DIR)\regcomp.obj \ $(TMP_DIR)\regerror.obj \ $(TMP_DIR)\regexec.obj \ $(TMP_DIR)\regfree.obj \ $(TMP_DIR)\tclAlloc.obj \ $(TMP_DIR)\tclAssembly.obj \ $(TMP_DIR)\tclAsync.obj \ $(TMP_DIR)\tclBasic.obj \ $(TMP_DIR)\tclBinary.obj \ $(TMP_DIR)\tclCkalloc.obj \ $(TMP_DIR)\tclClock.obj \ $(TMP_DIR)\tclCmdAH.obj \ $(TMP_DIR)\tclCmdIL.obj \ $(TMP_DIR)\tclCmdMZ.obj \ $(TMP_DIR)\tclCompCmds.obj \ $(TMP_DIR)\tclCompCmdsGR.obj \ $(TMP_DIR)\tclCompCmdsSZ.obj \ $(TMP_DIR)\tclCompExpr.obj \ $(TMP_DIR)\tclCompile.obj \ $(TMP_DIR)\tclConfig.obj \ $(TMP_DIR)\tclDate.obj \ $(TMP_DIR)\tclDictObj.obj \ $(TMP_DIR)\tclDisassemble.obj \ $(TMP_DIR)\tclEncoding.obj \ $(TMP_DIR)\tclEnsemble.obj \ $(TMP_DIR)\tclEnv.obj \ $(TMP_DIR)\tclEvent.obj \ $(TMP_DIR)\tclExecute.obj \ $(TMP_DIR)\tclFCmd.obj \ $(TMP_DIR)\tclFileName.obj \ $(TMP_DIR)\tclGet.obj \ $(TMP_DIR)\tclHash.obj \ $(TMP_DIR)\tclHistory.obj \ $(TMP_DIR)\tclIndexObj.obj \ $(TMP_DIR)\tclInterp.obj \ $(TMP_DIR)\tclIO.obj \ $(TMP_DIR)\tclIOCmd.obj \ $(TMP_DIR)\tclIOGT.obj \ $(TMP_DIR)\tclIOSock.obj \ $(TMP_DIR)\tclIOUtil.obj \ $(TMP_DIR)\tclIORChan.obj \ $(TMP_DIR)\tclIORTrans.obj \ $(TMP_DIR)\tclLink.obj \ $(TMP_DIR)\tclListObj.obj \ $(TMP_DIR)\tclLiteral.obj \ $(TMP_DIR)\tclLoad.obj \ $(TMP_DIR)\tclMainW.obj \ $(TMP_DIR)\tclMain.obj \ $(TMP_DIR)\tclNamesp.obj \ $(TMP_DIR)\tclNotify.obj \ $(TMP_DIR)\tclOO.obj \ $(TMP_DIR)\tclOOBasic.obj \ $(TMP_DIR)\tclOOCall.obj \ $(TMP_DIR)\tclOODefineCmds.obj \ $(TMP_DIR)\tclOOInfo.obj \ $(TMP_DIR)\tclOOMethod.obj \ $(TMP_DIR)\tclOOStubInit.obj \ $(TMP_DIR)\tclObj.obj \ $(TMP_DIR)\tclOptimize.obj \ $(TMP_DIR)\tclPanic.obj \ $(TMP_DIR)\tclParse.obj \ $(TMP_DIR)\tclPathObj.obj \ $(TMP_DIR)\tclPipe.obj \ $(TMP_DIR)\tclPkg.obj \ $(TMP_DIR)\tclPkgConfig.obj \ $(TMP_DIR)\tclPosixStr.obj \ $(TMP_DIR)\tclPreserve.obj \ $(TMP_DIR)\tclProc.obj \ $(TMP_DIR)\tclRegexp.obj \ $(TMP_DIR)\tclResolve.obj \ $(TMP_DIR)\tclResult.obj \ $(TMP_DIR)\tclScan.obj \ $(TMP_DIR)\tclStringObj.obj \ $(TMP_DIR)\tclStrToD.obj \ $(TMP_DIR)\tclStubInit.obj \ $(TMP_DIR)\tclThread.obj \ $(TMP_DIR)\tclThreadAlloc.obj \ $(TMP_DIR)\tclThreadJoin.obj \ $(TMP_DIR)\tclThreadStorage.obj \ $(TMP_DIR)\tclTimer.obj \ $(TMP_DIR)\tclTomMathInterface.obj \ $(TMP_DIR)\tclTrace.obj \ $(TMP_DIR)\tclUtf.obj \ $(TMP_DIR)\tclUtil.obj \ $(TMP_DIR)\tclVar.obj \ $(TMP_DIR)\tclZlib.obj !if $(STATIC_BUILD) ZLIBOBJS = \ $(TMP_DIR)\adler32.obj \ $(TMP_DIR)\compress.obj \ $(TMP_DIR)\crc32.obj \ $(TMP_DIR)\deflate.obj \ $(TMP_DIR)\infback.obj \ $(TMP_DIR)\inffast.obj \ $(TMP_DIR)\inflate.obj \ $(TMP_DIR)\inftrees.obj \ $(TMP_DIR)\trees.obj \ $(TMP_DIR)\uncompr.obj \ $(TMP_DIR)\zutil.obj !else ZLIBOBJS = $(OUT_DIR)\zdll.lib !endif TOMMATHOBJS = \ $(TMP_DIR)\bn_mp_add.obj \ $(TMP_DIR)\bn_mp_add_d.obj \ $(TMP_DIR)\bn_mp_and.obj \ $(TMP_DIR)\bn_mp_clamp.obj \ $(TMP_DIR)\bn_mp_clear.obj \ $(TMP_DIR)\bn_mp_clear_multi.obj \ $(TMP_DIR)\bn_mp_cmp.obj \ $(TMP_DIR)\bn_mp_cmp_d.obj \ $(TMP_DIR)\bn_mp_cmp_mag.obj \ $(TMP_DIR)\bn_mp_cnt_lsb.obj \ $(TMP_DIR)\bn_mp_copy.obj \ $(TMP_DIR)\bn_mp_count_bits.obj \ $(TMP_DIR)\bn_mp_div.obj \ $(TMP_DIR)\bn_mp_div_d.obj \ $(TMP_DIR)\bn_mp_div_2.obj \ $(TMP_DIR)\bn_mp_div_2d.obj \ $(TMP_DIR)\bn_s_mp_div_3.obj \ $(TMP_DIR)\bn_mp_exch.obj \ $(TMP_DIR)\bn_mp_expt_n.obj \ $(TMP_DIR)\bn_mp_grow.obj \ $(TMP_DIR)\bn_mp_init.obj \ $(TMP_DIR)\bn_mp_init_copy.obj \ $(TMP_DIR)\bn_mp_init_multi.obj \ $(TMP_DIR)\bn_mp_init_set.obj \ $(TMP_DIR)\bn_mp_init_size.obj \ $(TMP_DIR)\bn_mp_lshd.obj \ $(TMP_DIR)\bn_mp_mod.obj \ $(TMP_DIR)\bn_mp_mod_2d.obj \ $(TMP_DIR)\bn_mp_mul.obj \ $(TMP_DIR)\bn_mp_mul_2.obj \ $(TMP_DIR)\bn_mp_mul_2d.obj \ $(TMP_DIR)\bn_mp_mul_d.obj \ $(TMP_DIR)\bn_mp_neg.obj \ $(TMP_DIR)\bn_mp_or.obj \ $(TMP_DIR)\bn_mp_pack.obj \ $(TMP_DIR)\bn_mp_pack_count.obj \ $(TMP_DIR)\bn_mp_radix_size.obj \ $(TMP_DIR)\bn_mp_radix_smap.obj \ $(TMP_DIR)\bn_mp_read_radix.obj \ $(TMP_DIR)\bn_mp_rshd.obj \ $(TMP_DIR)\bn_mp_set.obj \ $(TMP_DIR)\bn_mp_shrink.obj \ $(TMP_DIR)\bn_mp_sqr.obj \ $(TMP_DIR)\bn_mp_sqrt.obj \ $(TMP_DIR)\bn_mp_sub.obj \ $(TMP_DIR)\bn_mp_sub_d.obj \ $(TMP_DIR)\bn_mp_signed_rsh.obj \ $(TMP_DIR)\bn_mp_to_ubin.obj \ $(TMP_DIR)\bn_mp_to_radix.obj \ $(TMP_DIR)\bn_mp_ubin_size.obj \ $(TMP_DIR)\bn_mp_unpack.obj \ $(TMP_DIR)\bn_mp_xor.obj \ $(TMP_DIR)\bn_mp_zero.obj \ $(TMP_DIR)\bn_s_mp_add.obj \ $(TMP_DIR)\bn_s_mp_balance_mul.obj \ $(TMP_DIR)\bn_s_mp_karatsuba_mul.obj \ $(TMP_DIR)\bn_s_mp_karatsuba_sqr.obj \ $(TMP_DIR)\bn_s_mp_mul_digs.obj \ $(TMP_DIR)\bn_s_mp_mul_digs_fast.obj \ $(TMP_DIR)\bn_s_mp_reverse.obj \ $(TMP_DIR)\bn_s_mp_sqr.obj \ $(TMP_DIR)\bn_s_mp_sqr_fast.obj \ $(TMP_DIR)\bn_s_mp_sub.obj \ $(TMP_DIR)\bn_s_mp_toom_sqr.obj \ $(TMP_DIR)\bn_s_mp_toom_mul.obj PLATFORMOBJS = \ $(TMP_DIR)\tclWin32Dll.obj \ $(TMP_DIR)\tclWinChan.obj \ $(TMP_DIR)\tclWinConsole.obj \ $(TMP_DIR)\tclWinError.obj \ $(TMP_DIR)\tclWinFCmd.obj \ $(TMP_DIR)\tclWinFile.obj \ $(TMP_DIR)\tclWinInit.obj \ $(TMP_DIR)\tclWinLoad.obj \ $(TMP_DIR)\tclWinNotify.obj \ $(TMP_DIR)\tclWinPipe.obj \ $(TMP_DIR)\tclWinSerial.obj \ $(TMP_DIR)\tclWinSock.obj \ $(TMP_DIR)\tclWinThrd.obj \ $(TMP_DIR)\tclWinTime.obj \ !if $(STATIC_BUILD) $(TMP_DIR)\tclWinReg.obj \ $(TMP_DIR)\tclWinDde.obj \ !else $(TMP_DIR)\tcl.res !endif TCLOBJS = $(COREOBJS) $(ZLIBOBJS) $(TOMMATHOBJS) $(PLATFORMOBJS) TCLSTUBOBJS = \ $(TMP_DIR)\tclStubLib.obj \ $(TMP_DIR)\tclTomMathStubLib.obj \ $(TMP_DIR)\tclOOStubLib.obj ### The following paths CANNOT have spaces in them as they appear on ### the left side of implicit rules. TOMMATHDIR = $(ROOT)\libtommath PKGSDIR = $(ROOT)\pkgs # Additional include and C macro definitions for the implicit rules # defined in rules.vc PRJ_INCLUDES = -I"$(TOMMATHDIR)" PRJ_DEFINES = /DMP_PREC=4 /Dinline=__inline /DHAVE_ZLIB=1 /D_CRT_SECURE_NO_DEPRECATE /D_CRT_NONSTDC_NO_DEPRECATE /DMP_FIXED_CUTOFFS # Additional Link libraries needed beyond those in rules.vc PRJ_LIBS = netapi32.lib user32.lib userenv.lib ws2_32.lib #--------------------------------------------------------------------- # TclTest flags #--------------------------------------------------------------------- !if "$(TESTPAT)" != "" TESTFLAGS = $(TESTFLAGS) -file $(TESTPAT) !endif #--------------------------------------------------------------------- # Project specific targets # There are 4 primary build configurations to consider from the combination # of static/shared and embed/noembed of the library zip. The targets are # done in the following order. # $(TCLLIB) - this is either the core static .lib or the .dll. The target # build does not embed the library zip in the DLL irrespective # of the noembed setting. A copy is made as $(TCLLIBRAW) # as the $(TCLLIB) binary is potentially modified later. # dlls - these are the registry and dde DLL's or static libraries # $(TCLSH) - the Tcl shell. This needs $(TCLLIB) to be built first as # it links against it. # $(TCLSCRIPTZIP) - the zip file that is to be embedded. Note this also # ships separately and needs to be built irrespective of the # whether it is embedded or not. All above targets need to # be built prior as they are used to build the zip (unlike # Unix where the external zip program is used.) # core - this virtual target builds the final release ready Tcl # library. For shared, embedded builds it appends $(TCLSCRIPTZIP) # to the $(TCLLIB). For other build configurations, this # is a no-op. # shell - this virtual target builds the final release ready tclsh shell. # For static, embedded builds it appends $(TCLSCRIPTZIP) # to the $(TCLSH). For other build configurations, this # is a no-op. # release - Everything that builds as part of a release #--------------------------------------------------------------------- release: setup $(TCLSH) $(TCLSTUBLIB) dlls pkgs all: setup $(TCLSH) $(TCLSTUBLIB) dlls $(CAT32) pkgs core: setup $(TCLLIB) $(TCLSTUBLIB) shell: setup $(TCLSH) dlls: setup $(TCLREGLIB) $(TCLDDELIB) $(OUT_DIR)\zlib1.dll tcltest: setup $(TCLTEST) dlls $(CAT32) install: install-binaries install-libraries install-docs install-pkgs !if $(SYMBOLS) install: install-pdbs !endif setup: default-setup test: test-core test-pkgs test-core: setup $(TCLTEST) dlls $(CAT32) set TCL_LIBRARY=$(ROOT:\=/)/library $(DEBUGGER) $(TCLTEST) "$(ROOT:\=/)/tests/all.tcl" $(TESTFLAGS) -loadfile << package ifneeded dde 1.4.4 [list load "$(TCLDDELIB:\=/)" Dde] package ifneeded registry 1.3.5 [list load "$(TCLREGLIB:\=/)" Registry] << runtest: setup $(TCLTEST) dlls $(CAT32) set TCL_LIBRARY=$(ROOT:\=/)/library $(DEBUGGER) $(TCLTEST) $(SCRIPT) runshell: setup $(TCLSH) dlls set TCL_LIBRARY=$(ROOT:\=/)/library $(DEBUGGER) $(TCLSH) $(SCRIPT) !if $(STATIC_BUILD) $(TCLLIB): $(TCLOBJS) $(LIBCMD) @<< $** << !else $(TCLLIB): $(TCLOBJS) $(DLLCMD) @<< $** << $(_VC_MANIFEST_EMBED_DLL) $(TCLIMPLIB): $(TCLLIB) !endif # $(STATIC_BUILD) $(TCLSTUBLIB): $(TCLSTUBOBJS) $(LIBCMD) -nodefaultlib $(TCLSTUBOBJS) $(TCLSH): $(TCLSHOBJS) $(TCLSTUBLIB) $(TCLIMPLIB) $(CONEXECMD) -stack:2300000 $** copy $(TMP_DIR)\tclsh.exe.manifest $(TCLSH).manifest $(_VC_MANIFEST_EMBED_EXE) $(TCLTEST): $(TCLTESTOBJS) $(TCLSTUBLIB) $(TCLIMPLIB) $(CONEXECMD) -stack:2300000 $** copy $(TMP_DIR)\tclsh.exe.manifest $(TCLTEST).manifest $(_VC_MANIFEST_EMBED_EXE) !if $(STATIC_BUILD) $(TCLDDELIB): $(TMP_DIR)\tclWinDde.obj $(LIBCMD) $** !else $(TCLDDELIB): $(TMP_DIR)\tclWinDde.obj $(TCLSTUBLIB) $(DLLCMD) $** $(_VC_MANIFEST_EMBED_DLL) !endif !if $(STATIC_BUILD) $(TCLREGLIB): $(TMP_DIR)\tclWinReg.obj $(LIBCMD) $** !else $(TCLREGLIB): $(TMP_DIR)\tclWinReg.obj $(TCLSTUBLIB) $(DLLCMD) $** $(_VC_MANIFEST_EMBED_DLL) !endif !if "$(MACHINE)" == "ARM64" $(OUT_DIR)\zlib1.dll: $(COMPATDIR)\zlib\win64-arm\zlib1.dll $(COPY) $(COMPATDIR)\zlib\win64-arm\zlib1.dll $(OUT_DIR)\zlib1.dll $(OUT_DIR)\zdll.lib: $(COMPATDIR)\zlib\win64-arm\zdll.lib $(COPY) $(COMPATDIR)\zlib\win64-arm\zdll.lib $(OUT_DIR)\zdll.lib !elseif "$(MACHINE)" == "IX86" $(OUT_DIR)\zlib1.dll: $(COMPATDIR)\zlib\win32\zlib1.dll $(COPY) $(COMPATDIR)\zlib\win32\zlib1.dll $(OUT_DIR)\zlib1.dll $(OUT_DIR)\zdll.lib: $(COMPATDIR)\zlib\win32\zdll.lib $(COPY) $(COMPATDIR)\zlib\win32\zdll.lib $(OUT_DIR)\zdll.lib !else $(OUT_DIR)\zlib1.dll: $(COMPATDIR)\zlib\win64\zlib1.dll $(COPY) $(COMPATDIR)\zlib\win64\zlib1.dll $(OUT_DIR)\zlib1.dll $(OUT_DIR)\zdll.lib: $(COMPATDIR)\zlib\win64\zdll.lib $(COPY) $(COMPATDIR)\zlib\win64\zdll.lib $(OUT_DIR)\zdll.lib !endif pkgs: @for /d %d in ($(PKGSDIR)\*) do \ @if exist "%~fd\win\makefile.vc" ( \ pushd "%~fd\win" & \ $(MAKE) -$(MAKEFLAGS) -f makefile.vc TCLDIR=$(ROOT) &\ popd \ ) test-pkgs: @for /d %d in ($(PKGSDIR)\*) do \ @if exist "%~fd\win\makefile.vc" ( \ pushd "%~fd\win" & \ $(MAKE) -$(MAKEFLAGS) -f makefile.vc TCLDIR=$(ROOT) test &\ popd \ ) install-pkgs: @for /d %d in ($(PKGSDIR)\*) do \ @if exist "%~fd\win\makefile.vc" ( \ pushd "%~fd\win" & \ $(MAKE) -$(MAKEFLAGS) -f makefile.vc TCLDIR=$(ROOT) install &\ popd \ ) clean-pkgs: @for /d %d in ($(PKGSDIR)\*) do \ @if exist "%~fd\win\makefile.vc" ( \ pushd "%~fd\win" & \ $(MAKE) -$(MAKEFLAGS) -f makefile.vc TCLDIR=$(ROOT) clean &\ popd \ ) hose-pkgs: @for /d %d in ($(PKGSDIR)\*) do \ @if exist "%~fd\win\makefile.vc" ( \ pushd "%~fd\win" & \ $(MAKE) -$(MAKEFLAGS) -f makefile.vc TCLDIR=$(ROOT) hose &\ popd \ ) $(CAT32): $(WIN_DIR)\cat.c $(cc32) $(cflags) $(crt) /D_CRT_NONSTDC_NO_DEPRECATE /DCONSOLE \ /DUNICODE /D_UNICODE -Fo$(TMP_DIR)\ $? $(CONEXECMD) -stack:16384 $(TMP_DIR)\cat.obj $(_VC_MANIFEST_EMBED_EXE) #--------------------------------------------------------------------- # Regenerate the stubs files. [Development use only] #--------------------------------------------------------------------- genstubs: !if !exist($(TCLSH)) @echo Build tclsh first! !else $(TCLSH) -encoding utf-8 $(TOOLSDIR:\=/)/genStubs.tcl $(GENERICDIR:\=/) \ $(GENERICDIR:\=/)/tcl.decls $(GENERICDIR:\=/)/tclInt.decls \ $(GENERICDIR:\=/)/tclTomMath.decls $(TCLSH) -encoding utf-8 $(TOOLSDIR:\=/)/genStubs.tcl $(GENERICDIR:\=/) \ $(GENERICDIR:\=/)/tclOO.decls !endif #---------------------------------------------------------------------- # The following target generates the file generic/tclTomMath.h. # It needs to be run (and the results checked) after updating # to a new release of libtommath. #---------------------------------------------------------------------- gentommath_h: !if !exist($(TCLSH)) @echo Build tclsh first! !else $(TCLSH) "$(TOOLSDIR:\=/)/fix_tommath_h.tcl" \ "$(TOMMATHDIR:\=/)/tommath.h" \ > "$(GENERICDIR)\tclTomMath.h" !endif #--------------------------------------------------------------------- # Build the Windows HTML help file. #--------------------------------------------------------------------- # NOTE: you can define HHC on the command-line to override this. # nmake does not set macro values if already set on the command line. !if defined(PROCESSOR_ARCHITECTURE) && "$(PROCESSOR_ARCHITECTURE)" == "AMD64" HHC="%ProgramFiles(x86)%\HTML Help Workshop\hhc.exe" !else HHC="%ProgramFiles%\HTML Help Workshop\hhc.exe" !endif HTMLDIR=$(OUT_DIR)\html HTMLBASE=TclTk$(VERSION) HHPFILE=$(HTMLDIR)\$(HTMLBASE).hhp CHMFILE=$(HTMLDIR)\$(HTMLBASE).chm htmlhelp: chmsetup $(CHMFILE) $(CHMFILE): $(DOCDIR)\* @$(TCLSH) $(TOOLSDIR)\tcltk-man2html.tcl "--htmldir=$(HTMLDIR)" @echo Compiling HTML help project -"$(HHC)" <<$(HHPFILE) >NUL [OPTIONS] Compatibility=1.1 or later Compiled file=$(HTMLBASE).chm Default topic=contents.htm Display compile progress=no Error log file=$(HTMLBASE).log Full-text search=Yes Language=0x409 English (United States) Title=Tcl/Tk $(DOTVERSION) Help [FILES] contents.htm docs.css Keywords\*.htm TclCmd\*.htm TclLib\*.htm TkCmd\*.htm TkLib\*.htm UserCmd\*.htm << chmsetup: @if not exist $(HTMLDIR)\nul mkdir $(HTMLDIR) install-docs: !if exist("$(CHMFILE)") @echo Installing compiled HTML help @$(CPY) "$(CHMFILE)" "$(DOC_INSTALL_DIR)\" !endif # "emacs font-lock highlighting fix #--------------------------------------------------------------------- # Generate the tcl.nmake file which contains the options used to build # Tcl itself. This is used when building extensions. #--------------------------------------------------------------------- tcl-nmake: $(OUT_DIR)\tcl.nmake $(OUT_DIR)\tcl.nmake: @type << >$@ CORE_MACHINE = $(MACHINE) CORE_DEBUG = $(DEBUG) CORE_TCL_THREADS = $(TCL_THREADS) CORE_USE_THREAD_ALLOC = $(USE_THREAD_ALLOC) << #--------------------------------------------------------------------- # Build tclConfig.sh for the TEA build system. #--------------------------------------------------------------------- tclConfig: $(OUT_DIR)\tclConfig.sh # TBD - is this tclConfig.sh file ever used? The values are incorrect! $(OUT_DIR)\tclConfig.sh: $(WIN_DIR)\tclConfig.sh.in @echo Creating tclConfig.sh @nmakehlp -s << $** >$@ @TCL_DLL_FILE@ $(TCLLIBNAME) @TCL_VERSION@ $(DOTVERSION) @TCL_MAJOR_VERSION@ $(TCL_MAJOR_VERSION) @TCL_MINOR_VERSION@ $(TCL_MINOR_VERSION) @TCL_PATCH_LEVEL@ $(TCL_PATCH_LEVEL) @CC@ $(CC) @DEFS@ $(pkgcflags) @CFLAGS_DEBUG@ -nologo -c -W3 -YX -Fp$(TMP_DIR)\ -MDd @CFLAGS_OPTIMIZE@ -nologo -c -W3 -YX -Fp$(TMP_DIR)\ -MD @LDFLAGS_DEBUG@ -nologo -machine:$(MACHINE) -debug -debugtype:cv @LDFLAGS_OPTIMIZE@ -nologo -machine:$(MACHINE) -release -opt:ref -opt:icf,3 @TCL_DBGX@ $(SUFX) @TCL_LIB_FILE@ $(PROJECT)$(VERSION)$(SUFX).lib @LIBS@ $(baselibs) $(PRJ_LIBS) @prefix@ $(_INSTALLDIR) @exec_prefix@ $(BIN_INSTALL_DIR) @SHLIB_CFLAGS@ @STLIB_CFLAGS@ @CFLAGS_WARNING@ -W3 @EXTRA_CFLAGS@ -YX @SHLIB_LD@ $(link32) $(dlllflags) @STLIB_LD@ $(lib32) -nologo @SHLIB_LD_LIBS@ $(baselibs) $(PRJ_LIBS) @SHLIB_SUFFIX@ .dll @DL_LIBS@ @LDFLAGS@ @TCL_CC_SEARCH_FLAGS@ @TCL_LD_SEARCH_FLAGS@ @LIBOBJS@ @RANLIB@ @TCL_LIB_FLAG@ $(PROJECT)$(VERSION)$(SUFX).lib @TCL_BUILD_LIB_SPEC@ $(OUT_DIR)\$(PROJECT)$(VERSION)$(SUFX).lib @TCL_LIB_SPEC@ $(LIB_INSTALL_DIR)\$(PROJECT)$(VERSION)$(SUFX).lib @TCL_INCLUDE_SPEC@ -I$(INCLUDE_INSTALL_DIR) @TCL_SRC_DIR@ $(ROOT) @TCL_PACKAGE_PATH@ $(LIB_INSTALL_DIR) @TCL_STUB_LIB_FILE@ $(TCLSTUBLIBNAME) @TCL_STUB_LIB_FLAG@ $(TCLSTUBLIBNAME) @TCL_STUB_LIB_SPEC@ -L$(LIB_INSTALL_DIR) $(TCLSTUBLIBNAME) @TCL_THREADS@ $(TCL_THREADS) @TCL_BUILD_STUB_LIB_SPEC@ -L$(OUT_DIR) $(TCLSTUBLIBNAME) @TCL_BUILD_STUB_LIB_PATH@ $(TCLSTUBLIB) @TCL_STUB_LIB_PATH@ $(LIB_INSTALL_DIR)\$(TCLSTUBLIBNAME) @CFG_TCL_SHARED_LIB_SUFFIX@ $(VERSION)$(SUFX).dll @CFG_TCL_UNSHARED_LIB_SUFFIX@ $(VERSION)$(SUFX).lib !if $(STATIC_BUILD) @TCL_SHARED_BUILD@ 0 !else @TCL_SHARED_BUILD@ 1 !endif @TCL_ZLIB_LIB_NAME@ zdll.lib << #--------------------------------------------------------------------- # The following target generates the file generic/tclDate.c # from the yacc grammar found in generic/tclGetDate.y. This is # only run by hand as yacc is not available in all environments. # The name of the .c file is different than the name of the .y file # so that make doesn't try to automatically regenerate the .c file. #--------------------------------------------------------------------- gendate: bison --output-file=$(GENERICDIR)/tclDate.c \ --name-prefix=TclDate \ $(GENERICDIR)/tclGetDate.y #--------------------------------------------------------------------- # Special case object file targets #--------------------------------------------------------------------- $(TMP_DIR)\testMain.obj: $(WIN_DIR)\tclAppInit.c $(cc32) $(appcflags) /DTCL_TEST /DUNICODE /D_UNICODE \ /DTCL_USE_STATIC_PACKAGES=$(TCL_USE_STATIC_PACKAGES) \ -Fo$@ $? $(TMP_DIR)\tclMainW.obj: $(GENERICDIR)\tclMain.c $(cc32) $(pkgcflags) /DUNICODE /D_UNICODE \ -Fo$@ $? $(ROOT)\manifest.uuid: copy $(WIN_DIR)\gitmanifest.in $(ROOT)\manifest.uuid git rev-parse HEAD >>$(ROOT)\manifest.uuid $(TMP_DIR)\tclUuid.h: $(ROOT)\manifest.uuid copy $(WIN_DIR)\tclUuid.h.in+$(ROOT)\manifest.uuid $(TMP_DIR)\tclUuid.h $(TMP_DIR)\tclEvent.obj: $(GENERICDIR)\tclEvent.c $(TMP_DIR)\tclUuid.h $(cc32) $(pkgcflags) -I$(TMP_DIR) \ -Fo$@ $(GENERICDIR)\tclEvent.c $(TMP_DIR)\tclTest.obj: $(GENERICDIR)\tclTest.c $(cc32) $(appcflags) -Fo$@ $? $(TMP_DIR)\tclTestObj.obj: $(GENERICDIR)\tclTestObj.c $(cc32) $(appcflags) -Fo$@ $? $(TMP_DIR)\tclWinTest.obj: $(WIN_DIR)\tclWinTest.c $(CCAPPCMD) $? $(TMP_DIR)\tclZlib.obj: $(GENERICDIR)\tclZlib.c $(cc32) $(pkgcflags) -I$(COMPATDIR)\zlib -Fo$@ $? $(TMP_DIR)\tclPkgConfig.obj: $(GENERICDIR)\tclPkgConfig.c $(cc32) $(pkgcflags) \ /DCFG_INSTALL_LIBDIR="\"$(LIB_INSTALL_DIR:\=\\)\"" \ /DCFG_INSTALL_BINDIR="\"$(BIN_INSTALL_DIR:\=\\)\"" \ /DCFG_INSTALL_SCRDIR="\"$(SCRIPT_INSTALL_DIR:\=\\)\"" \ /DCFG_INSTALL_INCDIR="\"$(INCLUDE_INSTALL_DIR:\=\\)\"" \ /DCFG_INSTALL_DOCDIR="\"$(DOC_INSTALL_DIR:\=\\)\"" \ /DCFG_RUNTIME_LIBDIR="\"$(LIB_INSTALL_DIR:\=\\)\"" \ /DCFG_RUNTIME_BINDIR="\"$(BIN_INSTALL_DIR:\=\\)\"" \ /DCFG_RUNTIME_SCRDIR="\"$(SCRIPT_INSTALL_DIR:\=\\)\"" \ /DCFG_RUNTIME_INCDIR="\"$(INCLUDE_INSTALL_DIR:\=\\)\"" \ /DCFG_RUNTIME_DOCDIR="\"$(DOC_INSTALL_DIR:\=\\)\"" \ -Fo$@ $? $(TMP_DIR)\tclAppInit.obj: $(WIN_DIR)\tclAppInit.c $(cc32) $(appcflags) /DUNICODE /D_UNICODE \ /DTCL_USE_STATIC_PACKAGES=$(TCL_USE_STATIC_PACKAGES) \ -Fo$@ $? ### The following objects should be built using the stub interfaces ### *ALL* extensions need to built with /DTCL_THREADS=1 $(TMP_DIR)\tclWinReg.obj: $(WIN_DIR)\tclWinReg.c $(cc32) $(appcflags) /DUSE_TCL_STUBS -Fo$@ $? $(TMP_DIR)\tclWinDde.obj: $(WIN_DIR)\tclWinDde.c $(cc32) $(appcflags) /DUSE_TCL_STUBS -Fo$@ $? ### The following objects are part of the stub library and should not ### be built as DLL objects. -Zl is used to avoid a dependency on any ### specific C run-time. $(TMP_DIR)\tclStubLib.obj: $(GENERICDIR)\tclStubLib.c $(cc32) $(stubscflags) -Fo$@ $? $(TMP_DIR)\tclTomMathStubLib.obj: $(GENERICDIR)\tclTomMathStubLib.c $(cc32) $(stubscflags) -Fo$@ $? $(TMP_DIR)\tclOOStubLib.obj: $(GENERICDIR)\tclOOStubLib.c $(cc32) $(stubscflags) -Fo$@ $? $(TMP_DIR)\tclsh.exe.manifest: $(WIN_DIR)\tclsh.exe.manifest.in @nmakehlp -s << $** >$@ @MACHINE@ $(MACHINE:IX86=X86) @TCL_WIN_VERSION@ $(DOTVERSION).0.0 << #--------------------------------------------------------------------- # Generate the source dependencies. Having dependency rules will # improve incremental build accuracy without having to resort to a # full rebuild just because some non-global header file like # tclCompile.h was changed. These rules aren't needed when building # from scratch. #--------------------------------------------------------------------- depend: !if !exist($(TCLSH)) @echo Build tclsh first! !else $(TCLSH) $(TOOLSDIR:\=/)/mkdepend.tcl -vc32 -out:"$(OUT_DIR)\depend.mk" \ -passthru:"/DBUILD_tcl $(TCL_INCLUDES) $(PRJ_INCLUDES)" $(GENERICDIR),$$(GENERICDIR) \ $(COMPATDIR),$$(COMPATDIR) $(TOMMATHDIR),$$(TOMMATHDIR) $(WIN_DIR),$$(WIN_DIR) @<< $(TCLOBJS) << !endif #--------------------------------------------------------------------- # Dependency rules #--------------------------------------------------------------------- !if exist("$(OUT_DIR)\depend.mk") !include "$(OUT_DIR)\depend.mk" !message *** Dependency rules in use. !else !message *** Dependency rules are not being used. !endif ### add a spacer in the output !message #--------------------------------------------------------------------- # Implicit rules that are not covered by the common ones defined in # rules.vc. A limitation exists with nmake that requires that # source directory can not contain spaces in the path. This an # absolute. #--------------------------------------------------------------------- {$(TOMMATHDIR)}.c{$(TMP_DIR)}.obj:: $(cc32) $(pkgcflags) -Fo$(TMP_DIR)\ @<< $< << {$(COMPATDIR)\zlib}.c{$(TMP_DIR)}.obj:: $(cc32) $(pkgcflags) -Fo$(TMP_DIR)\ @<< $< << $(TMP_DIR)\tclsh.res: $(TMP_DIR)\tclsh.exe.manifest $(WIN_DIR)\tclsh.rc $(TMP_DIR)\tcltest.res: $(TMP_DIR)\tclsh.exe.manifest $(WIN_DIR)\tcltest.rc #--------------------------------------------------------------------- # Installation. #--------------------------------------------------------------------- install-binaries: @echo Installing to '$(_INSTALLDIR)' @echo Installing $(TCLLIBNAME) !if "$(TCLLIB)" != "$(TCLIMPLIB)" @$(CPY) "$(TCLLIB)" "$(BIN_INSTALL_DIR)\" !endif @$(CPY) "$(TCLIMPLIB)" "$(LIB_INSTALL_DIR)\" @$(CPY) "$(OUT_DIR)\zlib1.dll" "$(BIN_INSTALL_DIR)\" !if exist($(TCLSH)) @echo Installing $(TCLSHNAME) @$(CPY) "$(TCLSH)" "$(BIN_INSTALL_DIR)\" !endif @echo Installing $(TCLSTUBLIBNAME) @$(CPY) "$(TCLSTUBLIB)" "$(LIB_INSTALL_DIR)\" install-libraries: tclConfig tcl-nmake install-msgs install-tzdata @if not exist "$(SCRIPT_INSTALL_DIR)" \ $(MKDIR) "$(SCRIPT_INSTALL_DIR)" @if not exist "$(SCRIPT_INSTALL_DIR)\opt0.4" \ $(MKDIR) "$(SCRIPT_INSTALL_DIR)\opt0.4" @if not exist "$(MODULE_INSTALL_DIR)" \ $(MKDIR) "$(MODULE_INSTALL_DIR)" @if not exist "$(MODULE_INSTALL_DIR)\8.4" \ $(MKDIR) "$(MODULE_INSTALL_DIR)\8.4" @if not exist "$(MODULE_INSTALL_DIR)\8.4\platform" \ $(MKDIR) "$(MODULE_INSTALL_DIR)\8.4\platform" @if not exist "$(MODULE_INSTALL_DIR)\8.5" \ $(MKDIR) "$(MODULE_INSTALL_DIR)\8.5" @if not exist "$(MODULE_INSTALL_DIR)\8.6" \ $(MKDIR) "$(MODULE_INSTALL_DIR)\8.6" @if not exist "$(LIB_INSTALL_DIR)\nmake" \ $(MKDIR) "$(LIB_INSTALL_DIR)\nmake" @echo Installing header files @$(CPY) "$(GENERICDIR)\tcl.h" "$(INCLUDE_INSTALL_DIR)\" @$(CPY) "$(GENERICDIR)\tclDecls.h" "$(INCLUDE_INSTALL_DIR)\" @$(CPY) "$(GENERICDIR)\tclOO.h" "$(INCLUDE_INSTALL_DIR)\" @$(CPY) "$(GENERICDIR)\tclOODecls.h" "$(INCLUDE_INSTALL_DIR)\" @$(CPY) "$(GENERICDIR)\tclPlatDecls.h" "$(INCLUDE_INSTALL_DIR)\" @$(CPY) "$(GENERICDIR)\tclTomMath.h" "$(INCLUDE_INSTALL_DIR)\" @$(CPY) "$(GENERICDIR)\tclTomMathDecls.h" "$(INCLUDE_INSTALL_DIR)\" @echo Installing library files to $(SCRIPT_INSTALL_DIR) @$(CPY) "$(ROOT)\library\history.tcl" "$(SCRIPT_INSTALL_DIR)\" @$(CPY) "$(ROOT)\library\init.tcl" "$(SCRIPT_INSTALL_DIR)\" @$(CPY) "$(ROOT)\library\clock.tcl" "$(SCRIPT_INSTALL_DIR)\" @$(CPY) "$(ROOT)\library\tm.tcl" "$(SCRIPT_INSTALL_DIR)\" @$(CPY) "$(ROOT)\library\parray.tcl" "$(SCRIPT_INSTALL_DIR)\" @$(CPY) "$(ROOT)\library\safe.tcl" "$(SCRIPT_INSTALL_DIR)\" @$(CPY) "$(ROOT)\library\tclIndex" "$(SCRIPT_INSTALL_DIR)\" @$(CPY) "$(ROOT)\library\package.tcl" "$(SCRIPT_INSTALL_DIR)\" @$(CPY) "$(ROOT)\library\word.tcl" "$(SCRIPT_INSTALL_DIR)\" @$(CPY) "$(ROOT)\library\auto.tcl" "$(SCRIPT_INSTALL_DIR)\" @$(CPY) "$(OUT_DIR)\tclConfig.sh" "$(LIB_INSTALL_DIR)\" @$(CPY) "$(WIN_DIR)\tclooConfig.sh" "$(LIB_INSTALL_DIR)\" @$(CPY) "$(WIN_DIR)\rules.vc" "$(LIB_INSTALL_DIR)\nmake\" @$(CPY) "$(WIN_DIR)\targets.vc" "$(LIB_INSTALL_DIR)\nmake\" @$(CPY) "$(WIN_DIR)\nmakehlp.c" "$(LIB_INSTALL_DIR)\nmake\" @$(CPY) "$(WIN_DIR)\x86_64-w64-mingw32-nmakehlp.exe" "$(LIB_INSTALL_DIR)\nmake\" @$(CPY) "$(OUT_DIR)\tcl.nmake" "$(LIB_INSTALL_DIR)\nmake\" @echo Installing package http 1.0 (obsolete) @$(CPY) "$(ROOT)\library\http1.0\*.tcl" \ "$(SCRIPT_INSTALL_DIR)\http1.0\" @echo Installing package opt $(PKG_OPT_VER) @$(CPY) "$(ROOT)\library\opt\*.tcl" \ "$(SCRIPT_INSTALL_DIR)\opt0.4\" @echo Installing package http $(PKG_HTTP_VER) as a Tcl Module @$(COPY) "$(ROOT)\library\http\http.tcl" \ "$(MODULE_INSTALL_DIR)\8.6\http-$(PKG_HTTP_VER).tm" @echo Installing package msgcat $(PKG_MSGCAT_VER) as a Tcl Module @$(COPY) "$(ROOT)\library\msgcat\msgcat.tcl" \ "$(MODULE_INSTALL_DIR)\8.5\msgcat-$(PKG_MSGCAT_VER).tm" @echo Installing package tcltest $(PKG_TCLTEST_VER) as a Tcl Module @$(COPY) "$(ROOT)\library\tcltest\tcltest.tcl" \ "$(MODULE_INSTALL_DIR)\8.5\tcltest-$(PKG_TCLTEST_VER).tm" @echo Installing package platform $(PKG_PLATFORM_VER) as a Tcl Module @$(COPY) "$(ROOT)\library\platform\platform.tcl" \ "$(MODULE_INSTALL_DIR)\8.4\platform-$(PKG_PLATFORM_VER).tm" @echo Installing package platform::shell $(PKG_SHELL_VER) as a Tcl Module @$(COPY) "$(ROOT)\library\platform\shell.tcl" \ "$(MODULE_INSTALL_DIR)\8.4\platform\shell-$(PKG_SHELL_VER).tm" @echo Installing $(TCLDDELIBNAME) !if $(STATIC_BUILD) !if !$(TCL_USE_STATIC_PACKAGES) @$(CPY) "$(TCLDDELIB)" "$(LIB_INSTALL_DIR)\" !endif !else @$(CPY) "$(TCLDDELIB)" "$(LIB_INSTALL_DIR)\dde$(DDEDOTVERSION)\" @$(CPY) "$(ROOT)\library\dde\pkgIndex.tcl" \ "$(LIB_INSTALL_DIR)\dde$(DDEDOTVERSION)\" !endif @echo Installing $(TCLREGLIBNAME) !if $(STATIC_BUILD) !if !$(TCL_USE_STATIC_PACKAGES) @$(CPY) "$(TCLREGLIB)" "$(LIB_INSTALL_DIR)\" !endif !else @$(CPY) "$(TCLREGLIB)" "$(LIB_INSTALL_DIR)\reg$(REGDOTVERSION)\" @$(CPY) "$(ROOT)\library\reg\pkgIndex.tcl" \ "$(LIB_INSTALL_DIR)\reg$(REGDOTVERSION)\" !endif @echo Installing encodings @$(CPY) "$(ROOT)\library\encoding\*.enc" \ "$(SCRIPT_INSTALL_DIR)\encoding\" # "emacs font-lock highlighting fix install-tzdata: @echo Installing time zone data @set TCL_LIBRARY=$(ROOT:\=/)/library @$(TCLSH_NATIVE) "$(ROOT:\=/)/tools/installData.tcl" \ "$(ROOT:\=/)/library/tzdata" "$(SCRIPT_INSTALL_DIR)/tzdata" install-msgs: @echo Installing message catalogs @set TCL_LIBRARY=$(ROOT:\=/)/library @$(TCLSH_NATIVE) "$(ROOT:\=/)/tools/installData.tcl" \ "$(ROOT:\=/)/library/msgs" "$(SCRIPT_INSTALL_DIR)/msgs" install-pdbs: @echo Installing debug symbols @$(CPY) "$(OUT_DIR)\*.pdb" "$(BIN_INSTALL_DIR)\" # "emacs font-lock highlighting fix #--------------------------------------------------------------------- # Clean up #--------------------------------------------------------------------- tidy: !if "$(TCLLIB)" != "$(TCLIMPLIB)" @echo Removing $(TCLLIB) ... @if exist $(TCLLIB) del $(TCLLIB) !endif @echo Removing $(TCLIMPLIB) ... @if exist $(TCLIMPLIB) del $(TCLIMPLIB) @echo Removing $(TCLSH) ... @if exist $(TCLSH) del $(TCLSH) @echo Removing $(TCLTEST) ... @if exist $(TCLTEST) del $(TCLTEST) @echo Removing $(TCLDDELIB) ... @if exist $(TCLDDELIB) del $(TCLDDELIB) @echo Removing $(TCLREGLIB) ... @if exist $(TCLREGLIB) del $(TCLREGLIB) clean: default-clean clean-pkgs hose: default-hose hose-pkgs realclean: hose .PHONY: # Local Variables: # mode: makefile # End: